قسم الكيمياء
Permanent URI for this collection
Browse
Browsing قسم الكيمياء by Subject "Cinétique"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Etude de l’adsorption de quelques cations métalliques sur un matériau poreux(Université De Larbi Ben M’hidi Oum EL Bouaghi, 2021) Bouzeghaia, El Atra; Hafsi, SaidL’objectif de ce présent travail consiste à réaliser une étude détaillée sur la performance d’une marne locale échantillonné dans la région d’Oum El Bouaghi pour l’élimination de cuivre(II), de chrome(VI) et de manganèse (II/VII) en solution aqueuse. La caractérisation physico-chimique de ce nouveau matériau a été effectuée par différentes techniques : la spectroscopie infrarouge à transformée de Fourier (FTIR), la spectrométrie de fluorescence X (FRX), la diffraction des rayons X (DRX) et le microscope électronique à balayage (MEB), outre la détermination de quelques propriétés physico-chimiques comme la surface spécifique (Méthode BET), la capacité d’échange cationique (CEC), le pH naturel et le potentiel zêta. Ceci nous a permis d’établir une série de données avec les différentes propriétés de ce matériau. Les différents paramètres tels que tels que : la masse, le pH, la vitesse d’agitation, la concentration initiale et la température ont été étudiés. La modélisation des résultats expérimentaux par l’utilisation de la méthode de régression non linéaire montre que la rétention de cuivre (II) et de manganèse (II/VII) obéissent au modèle de Langmuir tandis que le chrome(VI) suit le modèle de Freundlich. L'étude cinétique montre que le modèle pseudo-premier ordre décrit bien les résultats expérimentaux des trois cations métalliques. Les paramètres thermodynamiques (ΔG°, ΔH°, et ΔS°) indiquent que le processus d’adsorption de Cu(II) ou de Mn(II/VII) par la marne est de type physique, endothermique, et spontané (ΔG°<0). Les valeurs positives de ΔS° montrent une augmentation du désordre au niveau de l’interface solide-liquide. L'étude de l'adsorption des cations métalliques par la marne a révélé que le cuivre (II) et le chrome (VI) ont plus d'affinité que le manganèse (II/VII). The objective of this present work is to carry out a detailed study on the performance of a local marl sampled in the region of Oum El Bouaghi for the elimination of copper (II), chromium (VI) and manganese (II/VII) in aqueous solution. The physicochemical characterization of this new material was carried out by different techniques: Fourier transform infrared spectroscopy (FTIR), X-ray fluorescence spectrometry (FRX), X-ray diffraction (XRD) and the scanning electron microscope (SEM), in addition to the determination of some physicochemical properties such as the specific surface (BET method), the cation exchange capacity (CEC), the natural pH and the zeta potential. This allowed us to establish a series of data with the different properties of this material. The various parameters such as: mass, pH, stirring speed, initial concentration and temperature were studied. The modeling of the experimental results by the use of the non linear regression method shows that the retention of copper (II) and manganese (II/VII) obey the Langmuir model while chromium (VI) follows the Freundlich model. The kinetic study shows that the pseudo-first order model describes well the experimental results of the three metal cations. The thermodynamic parameters (ΔG°, ΔH°, and ΔS°) indicate that the process of adsorption of Cu(II) or Mn(II/VII) by marl is physical, endothermic, and spontaneous (ΔG°< 0). Positive values of ΔS° show an increase in disorder at the solid-liquid interface. The study of the adsorption of metal cations by marl revealed that copper (II) and chromium (VI) have more affinity than manganese (II /VII). الهدف من العمل المقدم هو القيام بدراسة مفصلة حول فعالية المارن المحلية التي تم جمعها من منطقة أم البواقي وذلك بغرض استخدامها لنزع النحاس (II) ، الكروم(VI) و المنغنيز(IIV/II) من محلول مائي. الكشف عن الخصائص الفيزيائية الكيميائية لهذه المادة الجديدة تم باستخدام عدة تقنيات : مطيافية الأشعة تحت الحمراء (FTIR) ، إنكسارالأشعة السينية (RXD)، المجهر الالكتروني الماسح (MEB). تم تحديد بعض الخصائص الفيزيائية الكيميائية مثل مساحة السطح (طريقة BET) ، قدرة تبادل الكاتيونات (CEC) ، pH الطبيعي، القدرة زيتا، حيث يتيح لنا ذلك إنشاء سلسلة من البيانات التي تشمل مختلف خصائص هذه المادة. تمت دراسة مختلف العوامل المرافقة لإمتزاز الملوثات على المارن مثل: كتلة المادة المازة ، pH ، سرعة الاهتزاز، التركيز الابتدائي و درجة الحرارة . توضح نمذجة النتائج التجريبية باستخدام الطريقة الغير خطية أن إمتزاز النحاس (II) والمنغنيز (VII/II) يخضع كل منهما لنموذج لانغمير بينما يتبع الكروم (VI) نموذج فرونليتش . إن دراسة حركية هذه الكاتيونات المعدنية الثلاثة أثبتت أنها تتبع الرتبة الأولى. أظهرت مقادير الديناميكية الحرارية(°S∆،°H∆،°G∆) أن عملية إمتزاز (II)Cu و ( IIV/II)Mn ذات طابع فيزيائي، ماص للحرارة وتلقائي (0>°G∆) بينما أكدت القيم الموجبة (°S∆) على زيادة الإضطراب على السطح البيني صلب/سائل. إن دراسة إمتزاز الكاتيونات المعدنية على المارن بينت أن النحاس (II) و المنغنيز(VII/II) أكثر ملاءمة من الكروم(VI).Item Etude de l’adsorption des colorants sur un matériau poreux charbon actif(University Of Oum El Bouaghi, 2020) Zeghache, Hadjer; Hafsi, SaidLes travaux réalisés dans le cadre de cet axe de recherche concernent l'étude de l'adsorption de trois colorants : carmin d'indigo, vert brillant et l'érythrosine sur un charbon actif d'origine végétal. Les différents paramètres tels que, le temps de contact, la concentration initiale des colorants, la vitesse d'agitation, pH initial de la solution, la dose d'adsorbant et la température sont pris en considération au cours de cette étude. Les modèles cinétiques du pseudo premier ordre, pseudo-second ordre, Avrami, ordre général, Elovich et la diffusion intra-particulaire ont été utilisés pour analyser les données cinétiques obtenues. La modélisation de la cinétique d'adsorption a montré que le modèle d'Avrami décrit parfaitement les résultats expérimentaux de l'adsorption des deux colorants : carmine d'indigo et l'érythrosine. Par contre, dans le cas du colorant vert brillant le processus d'adsorption suit le modèle appelé ordre général. La diffusion intra-particulaire est impliquée dans le mécanisme d'adsorption et s'effectue en deux étapes pour les trois colorants étudiés. En outre, les isothermes de sorption des colorants à différentes températures ont été établies et modélisées par les équations de Langmuir, Freundlich, Liu, Redlich-Peterson et Khan en utilisant la régression non linéaire. Il a été montré que le modèle de Liu donne un meilleur ajustement des données expérimentales par rapport aux autres modèles. Les paramètres thermodynamiques ( G°, et S°) relatifs au système adsorbant/adsorbât étudié indiquent que le processus d'adsorption est endothermique ( pour les trois colorants, spontané ( G°<0) pour le carmin d'indigo et l'érythrosine, et non-spontanée pour le colorant vert brillant ( G°>0). Les valeurs positives de S° montrent une augmentation du désordre au niveau de l'interface solide-liquide. ÊÊÚáÞ ÇáÃÚãÇá ÇáãäÌÒÉ Ýí ÅØÇÑ åÐÇ ÇáãÍæÑ ÇáÈÍËí ÈÏÑÇÓÉ ÇãÊÒÇÒ ËáÇËÉ ãáæäÇÊ : ÇáÞÑãÒí Çáäíáí ¡ ÇáÃÎÖÑ ÇááÇãÚ æÇáÅÑíËÑæÓíä Úáì ÇáßÑÈæä ÇáäÔØ ãä ÃÕá äÈÇÊí. æÞÏ Êãø ÇáÃÎÐ ÈÚíä ÇáÇÚÊÈÇÑ ÎáÇá åÐå ÇáÏÑÇÓÉ ÇáÚæÇãá ÇáãÎÊáÝÉ ãËá Òãä ÇáÊáÇãÓ¡ ÇáÊÑßíÒ ÇáÇÈÊÏÇÆí ááãáæä¡ ÓÑÚÉ ÇáÊÍÑíß¡ ÏÑÌÉ ÇáÍãæÖÉ ááãÍáæá¡ ßãíÉ ÇáãÇÏÉ ÇáãÇÒÉ æÏÑÌÉ ÇáÍÑÇÑÉ. Êã ÇÓÊÎÏÇã ÇáäãÇÐÌ ÇáÍÑßíÉ ãä ÇáÑÊÈÉ ÇáÃæáì ÇáßÇÐÈÉ æÇáÑÊÈÉ ÇáËÇäíÉ ÇáßÇÐÈÉ¡ ÇÝÑÇãí¡ ÇáÑÊÈÉ ÇáÚÇãÉ¡ ÇáæÝíÔ æÇáÊÔÊÊ ÏÇÎá ÇáÌÓíãÇÊ áÊÍáíá ÇáäÊÇÆÌ ÇáÍÑßíÉ ÇáÊí Êã ÇáÍÕæá ÚáíåÇ. ÃÙåÑÊ äãÐÌÉ ÍÑßíÉ ÇáÇãÊÒÇÒ Ãä äãæÐÌ ÇÝÑÇãí íÕÝ ÈÔßá ãËÇáí ÇáÈíÇäÇÊ ÇáÊÌÑíÈíÉ áÇãÊÒÇÒ ÇáÞÑãÒí Çáäíáí æÅÑíËÑæÓíä. ãä äÇÍíÉ ÃÎÑì¡ Ýí ÍÇáÉ Çáãáæä ÇáÃÎÖÑ ÇááÇãÚ¡ ÝÅä ÚãáíÉ ÇáÇãÊÒÇÒ ÊÊÈÚ äãæÐÌ ãÇ íÓãì ÈÇáÑÊÈÉ ÇáÚÇãÉ. ÃãøÇ äãæÐÌ ÇáÊÔÊÊ ÏÇÎá ÇáÌÓíãÇÊ Ýåæ íÔÇÑß Ýí ÂáíÉ ÇáÇãÊÒÇÒ æíäÝÐ Ýí ÎØæÊíä ááãáæäÇÊ ÇáËáÇËÉ ÇáãÏÑæÓÉ. ÈÇáÅÖÇÝÉ Åáì Ðáß¡ Êã äãÐÌÉ ãÊÓÇæí ÏÑÌÉ ÍÑÇÑÉ ááãáæäÇÊ ÇáËáÇËÉ ÚäÏ ÏÑÌÇÊ ÍÑÇÑÉ ãÎÊáÝÉ Úä ØÑíÞ ãÚÇÏáÇÊ áÇäÌãííÑ æÝÑíäÏáíÔ æáíæ æÑíÏáíÊÔ-ÈíÊÑÓæä æ ÎÇä ÈÇÓÊÎÏÇã ÇáÇäÍÏÇÑ ÛíÑ ÇáÎØí. æÞÏ ÊÈíä Ãä äãæÐÌ áíæ ÃßËÑ ÊØÇÈÞÇ ãÚ ÇáäÊÇÆÌ ÇáÊÌÑíÈíÉ ãÞÇÑäÉ ÈÇáäãÇÐÌ ÇáÃÎÑì. ÈíäÊ ãÞÇÏíÑ ÇáÏíäÇãíßíÉ ÇáÍÑÇÑíÉ ( G°, S°)ÇáãÊÚáÞÉ ÈÇáäÙÇã ÇáãÇÏÉ ÇáãÇÒÉ/ÇáãÇÏÉ ÇáããÊÒÉ¡ ÈÃä ÇáÚãáíÉ ãÇÕÉ ááÍÑÇÑÉ ( ÈÇáäÓÈÉ ááãáæäÇÊ ÇáËáÇËÉ¡ ÊáÞÇÆíÉ ÈÇáäÓÈÉ áÜ ÇáÞÑãÒí Çáäíáí æÅÑíËÑæÓíä æÛíÑ ÊáÞÇÆíÉ ÈÇáäÓÈÉ ááÃÎÖÑ ÇááÇãÚ. ÇáÞíã ÇáãæÌÈÉ áÜ S° Ïáíá Úáì ÒíÇÏÉ Ýí ÇáÇÖØÑÇÈ Úáì ãÓÊæì ÇáÓØÍ ÇáÈíäí ÇáÕáÈ/ÓÇÆá. The works carried out in this research axis relates to the study of adsorption of three dyes: indigo carmine, brilliant green, and erythrosine onto activated carbon of vegetable origin. The effect of various operating parameters, such as contact time, initial concentration of dyes, agitation speed, pH, adsorbent dose and temperature are considered. The kinetic data were modeled at three concentration using the pseudo-first order, pseudo-second order, avrami functional order, general order, elovich and intraparticle diffusion models. Findings results showed that avrami functional order had more conformity compared with the others, for indigo carmine, erythrosine dyes and general order kinetic model for brilliant green dye. The intraparticle diffusion is involved in the adsorption mechanism and takes place in two stages for the three studied dyes. Furthermore, the experimental data at equilibrium were studied at different temperatures through the non-linear regression of Langmuir, Freundlich, Liu, Redlich Peterson and Khan isotherm models. We found that the adsorption process can be favorably agreed by the Liu isotherm compared with the others models. Thermodynamic parameters ( G°, , S°) for the adsorption system indicate that the adsorption process is endothermic ( spontaneous process in nature ( G°<0) for indigo carmine, erythrosine and non- spontaneous for brilliant green dye ( G°>0). The positives values of ( S°) show an increased disorder at the solid-solution interface during the adsorption.